6 Steps For Effective Gun Cleaning

6 Steps For Effective Gun Cleaning

These are the 6 most crucial steps to gun cleaning:

Step 1. ALWAYS be certain the gun is unloaded and pointed in a safe direction!

Step 2. Fastidiously take gun aside, making sure to keep track of all parts. Please reference your house owners manual for detailed directions on learn how to disassemble weapon. For most over/unders, when the action is closed, you remove the forestock (wooden half the place your front hand goes underneath the barrel) by pulling down on the lever on the forestock. With the forestock off, you open the motion of the gun and pull up and forward on the barrels (be careful to not let the barrels fall off the gun and to the ground once the motion is open). You now have three distinct items, the receiver (stock and trigger assembly), the barrels, and the forestock. (Additionally, reference our gun cleaning video to observe along visually).

Step 3. Clean your weapon with a solvent (comparable to Hoppe's 9). Inside the barrels, use a bore brush or copper removal a rod with a patch with solvent applied to the patch. (wantable pushing from the breach to the front of barrels (the same direction the shot/slug travels). Then use a clear dry patch and push that patch by means of the barrels. Continue this alternating process utilizing clear patches (first with solvent and then without) till the patches no longer come out dirty. Use a toothbrush with solvent to wash other metal parts of gun to remove amassed residue/deposits/"gunk".

Step 4. Remove any remaining solvent from surfaces. Wipe down the firearm and all of the elements to remove any residual solvent (which if left on metal can be dangerous).

Step 5. Wipe down metal components with light coat of oil/lubricant/rust inhibitor. To protect the firearm and help it operate correctly, wipe down metal elements with a light coat of gun oil or lubricant comparable to silicone or RemLube by Remington. Use the lubricant/oil sparingly. Somewhat goes a long way. If the storing the gun, attempt not to go away fingerprints on it. While the fingerprints will seemingly not do anything to effect the perform of the gun, they can be unsightly and the oils in your skin might mar the finish of the metal.

Step 6. Reassemble weapon and confirm that it's functioning properly. Holding the receiver horizontal and with the barrels at a 45 degree angle to the ground, slide the barrels down onto/into the receiver until the "hook" at the bottom of the barrel(s) catches in the receiver. Lift up on the front of the barrels till they lock into place. Now reattach the forestock. With the small latch on the forestock open, slide the forestock into place and easily shut the latch. Then open the breach of the gun and shut it again to ensure reassembly was accomplished correctly. All components ought to move easily without any extra liquids/oils/and many others visible on any part(s) of the gun. Do NOT use undue power on the weapon. Chances are high if you must use much (if any) muscle, you're doing something incorrectly.